Laserfiche WebLink
F. Closers: <br />1. LCN <br />2. Norton, Dorma, Reading <br />G. Protective plates: <br />1. Quality <br />2. Hiawatha, Hager <br />H. Overhead stops: <br />1. Glynn -Johnson <br />2. Corbin, Rixon-Firemark <br />I. Floor and wall stops and holders: <br />1. Glynn -Johnson <br />2. Ives, Quality, Hager <br />J. <br />Thresholds, weatherstrips: <br />1. National Guard <br />2. Reese, Pemko, Zero <br />K. Flush bolts <br />1. Door controls <br />2. Glynn -Johnson, Ives, Quality <br />L. Coordinators <br />1. Door Controls <br />2. Glynn -Johnson <br />PART 3 - EXECUTION <br />3.1 INSTALLATION <br />A. Install hardware in accordance with manufacturer's recommendations and <br />instructions. <br />B. Install hardware on UL labeled openings in accordance with manufacturer's <br />requirements, so as to maintain the label. <br />C. Mortise and cut to close tolerance and conceal evidence of cutting the finished <br />work. <br />D. Remove, cover or protect hardware after fitting until paint or other finish is <br />applied; permanently install hardware after finishing operations are complete. <br />E. Install closers on the room side of corridor doors, stair side of stairways, and <br />interior side of exterior doors. <br />08700-3 <br />