Laserfiche WebLink
F. Mounting height: <br />1. Install hardware at mounting heights conforming to the recommended <br />mounting locations of the Builder's Hardware Manufacturers <br />Association. <br />G. Cut and fit threshold and floor covers to profile of door frames, with mitered <br />corners and hair -line joints. Join units with concealed welds or concealed <br />mechanical joints. <br />3.2 ADJUSTING AND CLEANING <br />A. At final completion, adjust and test all hardware for function and performance <br />and leave in good operating condition. <br />B. Clean all hardware to restore the original finish. <br />3.3 PROTECTION <br />A. Protect the finished installation until acceptance of the project. <br />B. Provide final adjustment or cleaning where necessary. <br />3.4 HARDWARE SCHEDULE <br />Heading #1 (Grou): GROUP 1) <br />Item#1 1 Elevation 102A <br />Item#2 1 Elevation 109 <br />2 Hiawatha KPx.US32D US32D <br />10"x 34" <br />6 Standard Hinge PBB BB8141/2" x 4/" US26D US26D <br />2 Lockset Yale AU 5408LN LH 626 626 <br />2 Surface Closer Norton CLP-7500 689 689 <br />WILL NEED EXISTING CITY KEYWAY SYSTEM <br />Heading #2 (Group: GROUP 2) <br />Item #3 1 Elevation 103 <br />1 Hiawatha KPx.US32D US32D <br />10" x 34" <br />3 Standard Hinge PBB BB8141/2" x 4/" US26D US26D <br />1 Lockset Yale AU 5407LN LH 626 626 <br />1 Wall Door Stop Hager 236W x US32D US32D <br />08700-4 <br />