Agenda - Council - 05/13/2014 - Laserfiche WebLink

Home

7083.4040 SSTS CREDENTIALING AND PRODUCT REGISTRATION 34 B. Manufacturers shall submit each proprietary product for registration to the commissioner. Products within a single series or model line, sharing distinct similarities in design, materials, and capabilities, are allowed to be registered under a single application, consistent with their test protocols for the certification of other products within a product series. Products outside of the series or model line must be registered under separate applications. C. Upon receipt of the application, the commissioner shall, within 60 days: (1) review the application and verify the application for compliance with item A; (2) if the application is not in compliance with item A, return the application for resubmittal with the requested information for full compliance with item A; and (3) if the application is complete and the commissioner determines that the product meets or exceeds all applicable protocols, the commissioner shall place the product on the list of registered treatment devices. The list of registered treatment devices shall be maintained on the agency Web site. D. Registrations are valid for up to three years, expiring on December 31 of the third year of registration, unless the product is recalled for any reason, found to be defective, or no longer available. E. To renew technology registration, a manufacturer shall: (1) submit a request for renewal of product registration at least 30 days before the current registration expires, using the form or in the format prescribed by the commissioner; (2) submit the results of retesting if the product has completed retesting according to the protocol required for registration and a report from the testing entity has been issued since initial registration or previous renewal. Renewal must be based on the most recent test results; and (3) provide an affidavit to the commissioner certifying whether the product has changed over the previous three years. If the product has changed, the affidavit must include a full description of the changes and how the changed product fulfills the requirements for initial registration. F. As part of the product registration renewal, the commissioner shall: (1) request field assessment comments from local units of government no later than October 31 for product renewal; (2) discuss with the Technical Advisory Panel of the advisory committee established under part 7083.6000 any field assessment information that impacts product registration renewal; (3) notify the manufacturer of any product to be discussed with the Technical Advisory Panel, prior to discussion with the Technical Advisory Panel, regarding the nature of comments received; and (4) renew, modify, or deny the product registration, based on information received during the renewal process. G. The commissioner shall maintain a readily available list of proprietary treatment products meeting the registration requirements established in this chapter. The product registration is a condition of approval for use. H. A manufacturer shall have readily accessible information, specific to a product's registered use in Minnesota, for designers, regulators, system owners, and other interested parties about the product, including but not limited to: (1) a product manual; Copyright ©2014 by the Rev so of Statutes, State of Minnesota. All Rights Reserved.