Agenda - Council - 05/13/2014 - Laserfiche WebLink

Home

7083.4080 SSTS CREDENTIALING AND PRODUCT REGISTRATION 38 D. a description of the function of the distribution medium along with any known limitations on its use; E. a description of the medium and technical information, including schematics; materials and characteristics; component design specifications; design capacity; volumes and flow assumptions and calculations; components; and dimensioned drawings, photos, application, and use; F. siting and installation requirements; G. a detailed description, procedure, and schedule of routine service and system maintenance events; H. identification of information requested to be protected from disclosure of trade secrets; 1. copies of product brochures and manuals, such as sales, promotional, design, installation, operation, and maintenance materials and homeowner instructions; J. a quantitative description of the trench -bottom and sidewall absorption area or sizing criteria for drip dispersal systems for each model seeking registration. Manufacturers' quantitative description of the absorption area must be based on the surface area of the product that infiltrates effluent into the soil; K. all available product testing results, including a listing of state approvals and denials; L. a statement from a licensed professional engineer that certifies the technology meets the standards established in part 7083.4070; M. a signed and dated certification by the manufacturer's senior executive or agent, specifically including the following statement: "I certify that 1 represent (INSERT MANUFACTURING COMPANY HERE) and 1 am authorized to prepare or direct the preparation of this application for registration. 1 attest, under penalty of law, that this document and all attachments are true, accurate, and complete."; N. a signed and dated certification from the licensed professional engineer including the statement: "I certify that I represent (INSERT PROFESSIONAL ENGINEERING FIRM NAME) and that I am authorized to certify the performance for the proprietary distribution product presented in this application. I attest, under penalty of law, that the technology report is true, accurate, and complete."; and O. a technology review fee if allowed by law. Subp. 2. Proprietary media products. Manufacturers shall submit proprietary media products for registration to the commissioner. Products within a single series or model line sharing distinct similarities in design, materials, and capabilities are allowed to be registered under a single application. Products outside of the series or model line must be registered under separate applications. Subp. 3. Commissioner review. Upon receipt of the application, the commissioner shall: A. review the application and verify the application for compliance with subpart 1; B. if the application is not in compliance with subpart 1, return the application for resubmittal with the requested information for full compliance with subpart 1; or C. if the application is complete and the commissioner determines that the product meets or exceeds all applicable protocols, the commissioner shall place the product on the list of distribution products. The list of registered distribution products will be maintained on the agency Web site. Subp. 4. Duration of registration. Registrations are valid for up to three years, expiring on December 31 of the third year of registration, unless the product is recalled for any reason, found to be defective, or no longer available. Copyright ©2014 by the Rev so of Statutes, State of Minnesota. All Rights Reserved.