Laserfiche WebLink
39 SSTS CREDENTIALING AND PRODUCT REGISTRATION 7083.4100 <br />Subp. 5. Renewal. To renew a proprietary distribution product registration, a manufacturer shall: <br />A. submit a request for renewal of product registration at least 30 days before the current <br />registration expires, using the form or in the format prescribed by the commissioner; and <br />B. provide an affidavit to the commissioner certifying whether the product has changed over <br />the previous three years. If the product has changed, the affidavit must include a full description of the <br />changes and how the changed product fulfills the requirements for initial registration. <br />Subp. 6. Commissioner review. As part of the product registration renewal, the commissioner shall: <br />A. request field assessment comments from local units of government no later than October 31 <br />for product renewal; <br />B. discuss with the Technical Advisory Panel of the advisory committee established under part <br />7083.6000 any field assessment information that affects product registration renewal; <br />C. notify the manufacturer of any product to be discussed with the Technical Advisory Panel, <br />prior to discussion with the panel, regarding the nature of comments received; and <br />D. renew, modify, or deny the product registration based on information received during the <br />renewal process. <br />Subp. 7. List. The commissioner shall maintain a list of readily available proprietary distribution <br />products meeting the registration requirements established in this part. The product registration is a condition <br />of approval for use. <br />Subp. 8. Manufacturer information. A manufacturer shall have readily accessible information, <br />specific to a product's registered use in Minnesota, for designers, regulators, system owners, and other <br />interested parties about the product, including but not limited to: <br />A. a product manual; <br />B. design instructions; <br />C. installation instructions; <br />D. information regarding operation and maintenance; <br />E. system owner instructions; and <br />F. a list of representatives and manufacturer -certified service providers, if any. <br />Statutory Authority: MS s 115.03; 115.55 <br />History: 32 SR 1420 <br />Published Electronically: March 11, 2011 <br />7083.4100 TRANSITION FROM PREVIOUS REQUIREMENTS FOR DISTRIBUTION <br />PRODUCTS TO NEW REGISTERED LIST. <br />Except for Type V systems designed under part 7080.2400, the following conditions apply: <br />A. the distribution products specified in Minnesota Rules 2005, chapter 7080, are allowed to <br />be installed for 24 months after February 4, 2008; <br />B. after 24 months after February 4, 2008, only those products registered under this chapter <br />are allowed to be installed as directed in registration guidance documents; <br />Copyright ©2014 by the Rev <br />so <br />of Statutes, State of Minnesota. All Rights Reserved. <br />