Laserfiche WebLink
Directional or Instructional signs are permitted in accordance with Section <br />9~,. 03 subd. ~. '" °~ .... ~ <br /> <br />Parking lot directional signs designating parking area enu'ances and exits are limited <br />to one sign for each entrance and/or exit and shall not exceed four square feet for <br />each exposed face. Parking lot directional signs shall not project higher than five <br />(5) feet in height, as measured from the established grade of the parking area to <br />which such signs are accessory. <br /> <br />Parking lot instructional signs designating the conditions of use or identify of <br />parking areas shall not exceed 8 square feet and shall not project higher than 10 feet <br />in height for wall signs and 7 feet in height for ground signs, as measured from the <br />established grade of the parking area(s) to which such signs are accessory <br /> <br />d) <br /> <br />Window Signs. Window signs shall not exceed 30% of the area of the window in which <br />the sign is proposed to be displayed. <br /> <br />9.12.10 BUSINESS AND INDUSTRIAL PARK SIGNS. <br /> <br />a) Park Identification Signs. <br /> <br />Industrial or business park identification signs permitted only with a conditional use <br />permit in accordance with Section 9.12.04. Industrial or business park signs shall <br />be permitted to contain the following information: the name and address of the park, the <br />management or the developer thereof, and the names of the members of the park in which <br />the sign is to be located, but containing no advertising material of any kind, and shall be <br />subject to the following: <br /> <br />1) All industrial and business park signs shall be ground or wall signs. <br /> <br />2) <br /> <br />3) <br /> <br />There shall not be more than one (1) industrial or business park sign for each point <br />of vehicular access to an office or industrial park. <br />The gross surface area of an industrial or business park sign shall not exceed fifty <br />square in gross surface area for each exposed face nor exceed an aggregate gross <br />surface area of one hundred (100) square feet, with an additional 10 square feet per <br />exposed face (20 square feet aggregate) per park member listed on the sign. <br /> <br />4) <br /> <br />A ground industrial or business park sign shall not project higher than ten (10) feet, <br />as measured from base of sign or grade of the nearest adjacent roadway, whichever <br />is higher. <br /> <br />5) <br /> <br />A wall industrial or business park sign shall not project higher than the parapet line <br />of the wall to which it is to be affixed. <br /> <br />b) Park Member Identification Signs. <br /> <br />Sign Ord. Revised February 27, 1992 <br /> Page 17 of 22 <br /> <br /> <br />