Laserfiche WebLink
1) <br /> <br />2) <br /> <br />2) <br /> <br />3) <br /> <br />4) <br /> <br />5) <br /> <br />9.12.11 <br />Subd. 1 <br /> <br />9.12.12 <br />Subd. 1 <br /> <br />Subd. 2 <br /> <br />Subd. 3 <br /> <br />Subd. 4 <br /> <br />~bei'e shall not be more than one wall sign for each principal building or <br />5~tem{nt or use within a building, except where the building abuts two or <br />!ino/,e streets, additional such signs, one (1) oriented to each abutting <br />~trdet, shall be permitted. <br /> <br />~he~re shall not be more than one ground sign for each principal <br />building. <br /> <br />',Theigross surface area of a wall sign shall not exceed fifteen (15%) of the tenant's <br />'hr U~e's proportionate share of the building wall to which the sign is to be affixed. <br />r <br />!~hq gross surface area of a ground sign shall not excced fifty (50) <br />i~qu~are feet for each exposed face nor exceed an aggregate gross <br />~surface area of one hundred (100) square feet. <br /> <br />i~rA ground sign shall not project higher than ten (1) feet, as measured <br />Ifro~n based of sign or grade of the nearet adjacent roadway, <br />/~whiChever is higher. <br /> <br />:iA ~all sign shall not project higher than the parapet lie of the wall to <br />:iwhieh it is to be affixed. <br />.: <br />iPLANNED UNIT DEVELOPMENTS <br />ilThe!developer shall be required to submit a sign plan for approval, drawn to scale <br />~witti elevations, at the time application is made for a Planned Unit Development. <br />!iThe!sign plan shall include but not be limited to the following information: number <br />~of ~igns, type of signs, sign sizes, type of construction materials, and sign <br />messages. <br /> <br /> CONSTRUCTION SPECIFICATIONS <br /> <br />'.iAll:~ermanent signs permitted by this ordinance shall be constructed in accordance <br />:w~th this secnon. <br /> <br />i',In addition to complying with the provisions of this ordinance, all signs shall be <br />~coni~tructed in accordance With the applicable provisions of the Uniform <br />'~[Sig~ Code and Electrical Code. <br /> <br />~iAll !signs shall be located in such a way that they maintain horizontal and vertical <br />::clearance of all electrical power lines and communication lines. <br /> <br />ilAlllsigns and their supporting structures shall maintain clearance and non- <br />.!inte~rference with all surface and underground facilities and conduits for water, <br />!;'iseW'age'i gas, electricity, or communications equipment or lines. In addition, the <br /> Sign Ord. Revised February 27, 1992 <br /> Page 18 of 22 <br /> <br />"/7 <br /> <br /> <br />