Agenda - Council - 08/23/2016 - Laserfiche WebLink

Home

Drawings, opinions, reports, surveys, Contract Documents. Engineer's review and Change Orders, designs, or approval of Shop Drawings and other Specifications;or submittals (except design calculations and design drawings)will be only for the purpose 2. giving directions or instructions, or stated in Paragraph 6.17.D.1. failing to give them,if that is the primary cause of the injury or damage. E. Contractor shall not be responsible for the adequacy of the performance or design 6.21 Delegation of Professional Design Services criteria required by the Contract Documents. A. Contractor will not be required to provide ARTICLE 7—OTHER WORK AT THE SITE professional design services unless such services are specifically required by the 7.01 Related Work at Site Contract Documents for a portion of the Work or unless such services are required to carry A. Owner may perform other work related to the out Contractor's responsibilities for Project at the Site with Owner's employees, construction means, methods, techniques, or via other direct contracts therefor, or have sequences and procedures. Contractor shall other work performed by utility owners. If not be required to provide professional such other work is not noted in the Contract services in violation of applicable law. Documents,then: B. If professional design services or 1. written notice thereof will be given to certifications by a design professional related Contractor prior to starting any such to systems, materials or equipment are other work;and specifically required of Contractor by the Contract Documents, Owner and Engineer 2. if Owner and Contractor are unable to will specify all performance and design agree on entitlement to or on the amount criteria that such services must satisfy. or extent,if any,of any adjustment in the Contractor shall cause such services or Contract Price or Contract Times that certifications to be provided by a properly should be allowed as a result of such licensed professional, whose signature and other work, a Claim may be made seal shall appear on all drawings,calculations, therefor as provided in Paragraph 10.05. specifications, certifications, Shop Drawings and other submittals prepared by such B. Contractor shall afford each other contractor professional. Shop Drawings and other who is a parry to such a direct contract, each submittals related to the Work designed or utility owner and Owner, if Owner is certified by such professional, if prepared by performing other work with Owner's others, shall bear such professional's written employees,proper and safe access to the Site, approval when submitted to Engineer. a reasonable opportunity for the introduction and storage of materials and equipment and C. Owner and Engineer shall be entitled to rely the execution of such other work, and shall upon the adequacy, accuracy and properly coordinate the Work with theirs. completeness of the services, certifications or Contractor shall do all cutting, fitting, and approvals performed by such design patching of the Work that may be required to professionals, provided Owner and Engineer properly connect or otherwise make its have specified to Contractor all performance several parts come together and properly and design criteria that such services must integrate with such other work. Contractor satisfy. shall not endanger any work of others by cutting,excavating,or otherwise altering their D. Pursuant to this Paragraph 6.2 1, Engineer's work and will only cut or alter their work with review and approval of design calculations the written consent of Engineer and the others and design drawings will be only for the whose work will be affected. The duties and limited purpose of checking for conformance responsibilities of Contractor under this with performance and design criteria given Paragraph are for the benefit of such utility and the design concept expressed in the owners and other contractors to the extent that Standard General Conditions 00 72 00-27