Laserfiche WebLink
SECTION 01 42 00 <br />SPECIFICATION REFERENCE <br />PART 1— GENERAL <br />1.01 STANDARD SPECIFICATIONS FOR WATERMAIN, SANITARY SEWER AND STORM SEWER <br />CONSTRUCTION <br />A. Watermain, sanitary sewer and storm sewer construction including pipe jacking/boring shall conform to the <br />applicable provisions of the "Standard Specifications for 2600 - Trench Excavation and Backfill / Surface <br />Restoration, 2611 - Watermain and Service Line Installation, 2621 - Sanitary Sewer and Storm Sewer <br />Installation" as published by the City Engineers Association of Minnesota, (CEAM) 2013 Edition. <br />B. Copies of the Standard Specifications are available from the CEAM web site at: http://ceam.org <br />C. References in this Project Manual or on the Plans, to the Standard Specifications, referenced in 1.01.A above, <br />shall serve to supplement or modify the Standard Specifications. Portions of the Standard Specifications not <br />specifically affected by the supplemented information of modification shall remain in effect as originally <br />written. <br />D. THREADED ITEMS - All threaded items furnished under this contract, including but not limited to mechanical <br />joint connectors, flanged joint connectors, mainline valves, saddles, corporation stops, curb stops, hydrants, and <br />air release valves shall be furnished to the nominal size as specified with ENGLISH threads. <br />1.02 STANDARD SPECIFICATIONS FOR GRADING, STREET AND SURFACE IMPROVEMENTS <br />A. All of Divisions II and III, and any specifically referenced Division I sections of the Minnesota Department of <br />Transportation (MnDOT), "Standard Specifications for Construction" and "Materials Lab Supplemental <br />Specifications for Construction", 2014 Editions, together with all the Supplemental Specifications shall apply to <br />all construction performed under this Contract except as modified in these Specifications. Unless noted, the <br />requirements in the Specifications are in addition to the MnDOT Specification section being referenced. <br />B. Whenever the word "Contracting Authority," "Department" or "Owner" is used in the sense of ownership as <br />part of these Specifications and Contract, it shall mean Owner as defined in the Form of Agreement. <br />C. References in this Project Manual or on the Standard Specifications referenced in 1.02.A above, shall serve to <br />supplement or modify the Standard Specifications. Portions of Standard Specifications not specifically affected <br />by the supplemented information or modification shall remain in effect as originally written. <br />1.03 ABBREVIATIONS <br />A. Wherever the following abbreviations are used, they shall have the meanings indicated. <br />AASHTO American Association of the State Highway and Transportation Officials <br />ACI American Concrete Institute <br />AI The Asphalt Institute <br />ASTM American Society for Testing and Materials <br />AWWA American Water Works Association <br />CEAM City Engineer's Association of Minnesota <br />CLFMI Chain Link Fence Manufacturers Institute <br />MN/DOT Minnesota Department of Transportation <br />OSHA Occupational Safety and Health Act of 1970 <br />PCA Portland Cement Association <br />PART 2 — PRODUCTS (Not used) <br />PART 3 — EXECUTION (Not used) <br />Division 1— General Requirements <br />DV 1-5 <br />