Laserfiche WebLink
] <br /> <br />3 <br /> <br />All required on-site detention areas, including <br />notes indicating the approximate area and volume of <br />the facility. <br /> <br />All plans shall indicate the proposed outlet for <br />the storm drainage from the property, including the <br />name of the drainageway (where appropriate), the <br />downstream conditions (developed, available drain- <br />ageways, etc.), and any downstream restrictions. <br /> <br />[6] Existing and/or proposed grading plan. <br /> <br />(i) <br /> <br />Location of temporary model homes, sales office, and/or <br />construction facilities, including temporary signs and <br />parking lots. <br /> <br />(j) Preliminary subdivision plat. <br /> <br />(k) One rendered set (unfolded) each of architectural, site <br /> plan and landscape drawings. <br /> <br />(1) 8 1/2" x 11" reduction of all plans and architectural <br /> drawl ngs. <br /> <br />{m) <br /> <br />Impact studies and other studies as the Planning and <br />Zoning Board may require for the full and complete con- <br />sideration of the planned unit development. <br /> <br />(4) Final Plan Submittal. <br /> <br />requ i red: <br /> <br />The following information and data is <br /> <br />(a) Application form and filing fee. <br /> <br />(b) <br /> <br />Final site plan shall be submitted on 24" x 36" sheets <br />at a scale 1" = 50 feet or 1" = 100 feet showing the <br />following information: <br /> <br />[1] Land use data (same information as required on the <br /> preliminary site plan). <br /> <br />[2] Lot lines, easements, public rights-of-way as per <br /> subdivision plat. <br /> <br />[3] <br /> <br />Exact location of all buildings and structures and <br />three-dimensional building envelopes dimensioned on <br />at least two sides to the nearest platted property <br />line. <br /> <br />[4] Existing and proposed streets with names. Designa- <br /> <br /> <br />