Laserfiche WebLink
The following, standards shall a~l~. to Industrial Dis_t_ric_ts__Onl~ <br /> <br />~TYPE OF BUILDING CONSTRUCTION (EXTERIOR) -- ~.... ~ ,.[X~~· <br /> <br /> All exterior wall finishes on any building in an Industrial District. <br /> shall be of material other than metal on at least Fifty (50) percent <br /> <br /> may change the requirements of this paragraph depending on the location <br /> <br />of the building and surrounding areas. <br /> <br />LOADING <br /> <br />Loading facilities of sufficient size and number to provide for the <br />requirements of each use shall be provided on the site of each <br />principal use, the exact size and number required to depend on the <br />nature of the principal use and type of transport service used, but in <br />no event shall there be less than one truck transport loading facility <br />for each 50,000 square feet of building floor area or fraction thereof. <br /> <br />A loading facility shall include the dock for loading and unloading, <br />the berth for the vehicle at the dock and maneuvering areas. <br /> <br /> Off-street loading facilities shall be designed in an area not less than <br /> <br /> 12 feet in width and 65 feet in length, exclusive of aisles and maneuvering <br /> space. All such space shall be in the rear of principal structure and shall <br /> be used exclusively for the loading and unloading of merchandise. All <br /> such facilities including their related aisles and maneuvering <br /> <br />space shall be surfaced in the same manner as that prescribed for parking <br /> <br /> areas. <br /> <br /> <br />