Agenda - Council - 06/12/2018 - Laserfiche WebLink

Home

2017FYA-BASE.DV'G NOTES: 1) ALL ITEMS OF THIS SIGNAL SYSTEM ARE INPLACE AND SHALL BE REUSED AND MAINTAINED INPLACE, UNLESS OTHERWISE NOTED ON PLANS. 2) ALL HANDHOLES ARE PVC HANDHOLES WITH METAL FRAMES AND COVERS AND ARE INPLACE (REUSE AND MAINTAIN INPLACE). 3) ALL PEDESTRIAN SIGNAL HEADS ARE ONE —SECTION LED "HAND/ WALKING PERSON" COUNTDOWN TIMER INDICATIONS AND ARE INPLACE (REUSE AND MAINTAIN INPLACE). 4) ALL LOOP DETECTORS ARE INPLACE AND SHALL BE REUSED AND MAINTAINED INPLACE AND OPERATIONAL, EXCEPT AS FOLLOWS: CONTRACTOR SHALL FURNISH AND INSTALL NEW LOOP DETECTORS D1-3, D1-4, D3-3, D3-4, D5-3, D5-4, AND D7-2 IN PVC PER DETAILS INCLUDED ELSEWHERE IN THESE PLANS. LOOP DETECTOR WIRES FOR NEW LOOP DETECTORS SHALL BE CROSS —LINKED POLY— ETHYLENE (XLP) #12 AWG IN 3/4" NMC. SEE SPECIAL PROVISIONS. 5) ANY DAMAGE TO INPLACE TRAFFIC SIGNAL FACILITIES (CONDUIT, CABLES, HANDHOLES, SIGNAL POLES, ETC.), DUE TO TRAFFIC SIGNAL REVISION WORK, SHALL BE REPAIRED BY CONTRACTOR TO SATISFACTION OF THE ENGINEER, AT NO EXPENSE TO THE COUNTY. 6) CONTRACTOR SHALL MAINTAIN OPERATION OF THE SIGNAL SYSTEM AT ALL TIMES, EXCEPT AS OTHERWISE APPROVED BY ENGINEER. 7) ALL NEW VEHICULAR SIGNAL HEADS SHALL HAVE BACKGROUND SHIELDS FURNISHED & INSTALLED BY CONTRACTOR. ALL INPLACE VEHICULAR SIGNAL HEADS BEING REUSED AS PART OF REVISE SIGNAL SYSTEM "C" HAVE BACKGROUND SHIELDS (REUSE AND MAINTAIN INPLACE). 8) LOCATION OF NEW LOOP DETECTORS SHALL BE DETERMINED IN THE FIELD BY THE ENGINEER. 9) F & I = NEW, FURNISH AND INSTALL. S & I = INPLACE, SALVAGE AND INSTALL. 10) SEE SPECIAL PROVISIONS FOR COUNTY FURNISHED MATERIALS TO BE INSTALLED AND MADE OPERATIONAL BY CONTRACTOR. 11) ALL NEW VEHICULAR SIGNAL HOUSINGS, BACKGROUND SHIELDS AND VISORS SHALL BE FABRICATED USING BLACK POLYCARBONATE MATERIALS. SEE SPECIAL PROVISIONS. 12) SEE SPECIAL PROVISIONS REGARDING NEW TYPE C SIGN PANELS TO BE FURNISHED AND INSTALLED BY CONTRACTOR (INCLUDED AS PART OF PAY ITEM FOR "REVISE SIGNAL SYSTEM C"). 13) CONTRACTOR SHALL BE RESPONSIBLE FOR INSTALLING AND MAKING OPERATIONAL A NEW COUNTY FURNISHED CONTROLLER CABINET COMPLETE WITH NEW CONTROL EQUIPMENT ON THE INPLACE CABINET FOUNDATION (Sc FOR SALVAGING THE EXISTING CONTROLLER AND CABINET TO THE COUNTY. SEE SPECIAL PROVISIONS (INCIDENTAL). DRAWN BY: DESIGNER: CHECKED BY: DESIGN TEAM JMG JMG JMG NO. BY DATE REVISIONS INPLACE — PA100 POLE FOUNDATION (MAINTAIN TYPE PA100—A-55—D40-9 (DAVIT INPLACE) LUMINAIRE-250 W HPS 1—ONE WAY SIGNAL —OVERHEAD AT CAPPED MID —MOUNT AT 23' (FOR F 1—ONE WAY SIGNAL —POLE MOUNTEE 2—SETS CD PED SIGNALS —POLE MO 2—PEDESTRIAN PUSH BUTTONS TYPE D SIGN PANEL —OVERHEAD AT ONE WAY EVP DETECTOR AND LIGH 2—R6-1 SIGN PANELS —POLE MOUN- EXTENDED INTO H.H.1: 3" R.S.C. 2-12/c#14 2-4/c#14 1-3/c#14 1-3/c#20 2-2/c#14 1-3/c#14 (LUM) 1-1/c#6 (GRD) INPLACE ONE WAY SIGNAL AND MOUNT —OVERHEAD AT (REMOVE) I ONE WAY SIGNAL AND MOUNT —POLE MOUNTEE 2—PED PB INSTRUCTION SIGNS (R10-4b) F & I — 1—ONE WAY SIGNAL AND ANGLE MOUNT—OVERH 1—ONE WAY SIGNAL AND ANGLE MOUNT —POLE I (NEW 1-2) 2—PED PB INSTRUCTION SIGNS (R10-3e) — R10—X12 SIGN PANEL —ADJACENT TO 7-1 2 - - INPLACE -- PA100 POLE FOUNDATION (MAINTAIN TYPE PA100—A-55—D40-9 (DAVIT A INPLACE) LUMINAIRE-250 W HPS 1—ONE WAY SIGNAL —OVERHEAD AT 1 CAPPED MID —MOUNT AT 29' 1—ONE WAY SIGNAL —POLE MOUNTED 2—SETS CD PED SIGNALS —POLE MOU 2—PEDESTRIAN PUSH BUTTONS TYPE D SIGN PANEL —OVERHEAD AT ONE WAY EVP DETECTOR AND LIGHT 2—R6-1 SIGN PANELS —POLE MOUNTS EXTENDED INTO H.H.5: 3" R.S.C. 2-12/c#14 2-4/c#14 1-3/c#14 1-3/c#20 2-2/c#14 1-3/c#14 (LUM) -- 1-1/c#6 (GRD) INPLACE -- ONE WAY SIGNAL AND MOUNT —OVERHEAD AT (REMOVE) I ONE WAY SIGNAL AND MOUNT —POLE MOUNTED 2—PED PB INSTRUCTION SIGNS (R10-4b) F & I -- 1—ONE WAY SIGNAL AND ANGLE MOUNT—OVERHE 1—ONE WAY SIGNAL AND STRAIGHT MOUNT—OVEF 1—ONE WAY SIGNAL AND ANGLE MOUNT —POLE M (NEW 3-3) 2—PED PB INSTRUCTION SIGNS (R10-3e) R10—X12 SIGN PANEL —ADJACENT TO 1-1 -- 1-12/c#14 I HEREBY CERRFY THAT mils UNDER MY DIRECT SUPERNSI PROFESSIONAL ENGINEER UNE Dater March 7.20