Agenda - Council - 06/12/2018 - Laserfiche WebLink

Home

2017FYA-BASE.DWG NOTES: 1) ALL ITEMS OF THIS SIGNAL SYSTEM ARE INPLACE AND SHALL BE REUSED AND MAINTAINED INPLACE, UNLESS OTHERWISE NOTED ON PLANS. 2) ALL HANDHOLES ARE PVC HANDHOLES WITH METAL FRAMES AND COVERS AND ARE INPLACE (REUSE AND MAINTAIN INPLACE). 3) ALL PEDESTRIAN SIGNAL HEADS ARE ONE -SECTION LED "HAND/ WALKING PERSON" COUNTDOWN TIMER INDICATIONS AND ARE INPLACE (REUSE AND MAINTAIN INPLACE). 4) ALL LOOP DETECTORS ARE INPLACE AND SHALL BE REUSED AND MAINTAINED INPLACE AND OPERATIONAL, EXCEPT AS FOLLOWS; CONTRACTOR SHALL FURNISH AND INSTALL NEW LOOP DETECTORS D1-2, D3-3, D3-4, AND D5-2 IN PVC PER DETAILS INCLUDED ELSEWHERE IN THESE PLANS. LOOP DETECTOR WIRES FOR NEW LOOP DETECTORS SHALL BE CROSS -LINKED POLYETHYLENE (XLP) #12 AWG IN 3/4" NMC. SEE SPECIAL PROVISIONS. 5) ANY DAMAGE TO INPLACE TRAFFIC SIGNAL FACILITIES (CONDUIT, CABLES, HANDHOLES, SIGNAL POLES, ETC.), DUE TO TRAFFIC SIGNAL REVISION WORK, SHALL BE REPAIRED BY CONTRACTOR TO SATISFACTION OF THE ENGINEER, AT NO EXPENSE TO THE COUNTY. 6) CONTRACTOR SHALL MAINTAIN OPERATION OF THE SIGNAL SYSTEM AT ALL TIMES, EXCEPT AS OTHERWISE APPROVED BY ENGINEER. 7) ALL NEW VEHICULAR SIGNAL HEADS SHALL HAVE BACKGROUND SHIELDS FURNISHED & INSTALLED BY CONTRACTOR. ALL INPLACE VEHICULAR SIGNAL HEADS BEING REUSED AS PART OF REVISE SIGNAL SYSTEM "D" HAVE BACKGROUND SHIELDS (REUSE AND MAINTAIN INPLACE). 8) LOCATION OF NEW LOOP DETECTORS SHALL BE DETERMINED IN THE FIELD BY THE ENGINEER. 9) F & I = NEW, FURNISH AND INSTALL. S & I = INPLACE, SALVAGE AND INSTALL. 10) SEE SPECIAL PROVISIONS FOR COUNTY FURNISHED MATERIALS TO BE INSTALLED AND MADE OPERATIONAL BY CONTRACTOR. 11) ALL NEW VEHICULAR SIGNAL HOUSINGS, BACKGROUND SHIELDS AND VISORS SHALL BE FABRICATED USING BLACK POLYCARBONATE MATERIALS. SEE SPECIAL PROVISIONS. 12) SEE SPECIAL PROVISIONS REGARDING NEW TYPE C SIGN PANELS TO BE FURNISHED AND INSTALLED BY CONTRACTOR (INCLUDED AS PART OF PAY ITEM FOR "REVISE SIGNAL SYSTEM D"). DRAWN BY: DESIGNER: CHECKED BY: JMG JMG JMG DESIGN TEAM NO. BY DATE OINPLACE - (MAINTAIN INPLACE) INPLACE (REMOVE) PA100 POLE FOUNDATION TYPE PA100-A-55-D40-9 (DAVIT AT LUMINAIRE-250 W HPS 1-ONE WAY SIGNAL -OVERHEAD AT 17 1-ONE WAY SIGNAL -POLE MOUNTED 1 1-SET CD PED SIGNALS -POLE MOUNT 1-PEDESTRIAN PUSH BUTTON & SIGN TYPE D SIGN PANEL -OVERHEAD AT 2: 1-R9-3 (NO PED XING) SIGN -FACING 2-R6-1 SIGN PANELS -POLE MOUNTED EXTENDED INTO H.H.1: 3" R.S.C. 2-12/c#14 1-4/c#14 1-3/c#14 1-3/c#20 2-2/c#14 1-3/c#14 (LUM) 1-1/c#6 (GRD) ONE WAY SIGNAL AND MOUNT-OVERH ONE WAY SIGNAL AND MOUNT -POLE INPLACE ONE WAY EVP DETECTOR AND LIGHT- S & I) Z (F & 1 3/4" R.S.C. EXTENSION OVE F & I --- 5 FOOT MAST ARM EXTENSION 1-ONE WAY SIGNAL AND ANGLE MOUNT 1-ONE WAY SIGNAL AND STRAIGHT MOL STRAP -ON MID -MAST ARM MOUNT AT I 1-ONE WAY SIGNAL AND ANGLE MOUNT (NEW 5-2) R10-X12 SIGN PANEL -ADJACENT TO 3- -- 1-6/c#14 2 - INPLACE -- PA100 POLE FOUNDATION - (MAINTAIN TYPE PA100-A-50-D40-9 (DAVIT AT INPLACE) LUMINAIRE-250 W HPS 2-ONE WAY SIGNALS -OVERHEAD AT 1 1-ONE WAY SIGNAL -POLE MOUNTED 1 2-SETS CD PED SIGNALS -POLE MOUN 2-PEDESTRIAN PUSH BUTTONS & SIGI TYPE D SIGN PANEL -OVERHEAD AT 2E ONE WAY EVP DETECTOR AND UGHT A 2-R6-1 SIGN PANELS -POLE MOUNTED EXTENDED INTO H.H.5: 3" R.S.C. 2-12/c#14 2-4/c#14 1-3/c#14 1-3/c#20 2-2/c#14 1-3/c#14 (LUM) -- 1-1/c#6 (GRD) INPLACE (REMOVE) I ONE WAY SIGNAL AND MOUNT -OVERHEAD AT 0' ONE WAY SIGNAL AND MOUNT -POLE MOUNTED £ F & I - 1-ONE WAY SIGNAL AND ANGLE MOUNT -OVERHEAT 1-ONE WAY SIGNAL AND ANGLE MOUNT -POLE MO1 (NEW 7-2) — R10-X12 SIGN PANEL -ADJACENT TO 5-1 I HEREBY CERRFY THAT THI: UNDER MY DIRECT SUPERMSI PROFESSIONAL ENGINEER UNI REVISIONS Dater ' March 7. 20