My WebLink
|
Help
|
About
|
Sign Out
Home
Agenda - Council Work Session - 05/01/2007
Ramsey
>
Public
>
Agendas
>
Council Work Session
>
2007
>
Agenda - Council Work Session - 05/01/2007
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
3/19/2025 1:20:10 PM
Creation date
4/30/2007 8:55:14 AM
Metadata
Fields
Template:
Meetings
Meeting Document Type
Agenda
Meeting Type
Council Work Session
Document Date
05/01/2007
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
53
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
<br />1. Directional or Instructional signs are permitted in accordance <br />with ~9.l2.03 Subd. 9. <br /> <br />2. Parking lot directional signs designating parking area entrances <br />and exits are limited to one sign for each entrance and/or exit <br />and shall not exceed four square feet for each exposed face. <br />Parking lot directional signs shall not project higher than five <br />(5) feet in height, as measured from the established grade of the <br />parking area to which such signs are accessory. <br /> <br />3. Parking lot instructional signs designating the conditions of use <br />or identifying parking areas shall not exceed 8 square feet and <br />shall not project higher than ten (10) feet in height for wall <br />signs and seven (7) feet in height for ground signs, as measured <br />from the established grade of the parking area(s) to which such <br />SIgns are accessory. <br /> <br />4. Window signs are restricted to thirty percent (30%) of the area <br />of the window in which the sign is to be displayed. <br /> <br />Subd.2. Shopping Center Signs. In accordance withRamsey City <br />Code Section 9.03.06 (Site Plan Review), Subdivision 1 (Required Site Plan/Building <br />Design Information, item 'c' (Signs), the developer shall submit a sign plan for approval, <br />drawn to scale with elevations, at the time application is made for site plan approval. The <br />sign plan shall include but not be limited to the following information: number of signs, <br />type of signs, sign sizes~ type of construction materials,. sign messages, and proposed sign <br />locations. <br /> <br />9.12.09. <br /> <br />E-l and E-2 Employment Type Districts <br /> <br />Subdivision 1. Wall, Canopy or Marquee Sign. Total sign area may not <br />exceed fifteen (15) percent of the front building fayade. 'Sign height shall not exceed the <br />tope of the parapet wall or, if no parapet wall, sign height shall not exceed the height of <br />the eaves. A wall, canopy or marquee sign may be located on the outermost wall of any <br />principal building but shall not project more than sixteen (16) inches from the wall to <br />which the sign is to be affi~ed. Where a principal building is devoted to two (2) or more <br />permitted uses, the operator of each such use may install a wall sign upon his/her <br />proportionate share of the building wall to which the sign is to be affixed. The maximum <br />gross surface area of each such wall sign. shall be determined by calculating the <br />proportionate share of the area of the building wall, including doors and windows to <br />which the sign is to be affixed and applying such proportion to the total permitted wall <br />sign aggregate gross surface area for the building. The gross. surface area of a wall sign <br />may be increased by ten percent (10%) if such wall sign: <br />
The URL can be used to link to this page
Your browser does not support the video tag.