Laserfiche WebLink
7.6 A Federal Q2B siren with brake shall be mounted on front <br /> bump.e.r. .. <br />7.6.1 A siren brake button shall be installed on the switch panel. <br />7.7 A 'Federal Model Pa-300M ~lectronic siren shall be'installed in <br /> the cab. A Federal siren speaker shall be mounted in the front <br /> bu.mper. <br />7'.7.1 An air horn control button shaii be provide'~l at the pump <br /> panel. <br />7.8 Batteries shall ~e enclosed in a vented'compartment and <br /> mounted on non-corrosive material. <br />7,9 Hand controls shall be provided at the passengers front seat -' <br /> for the; air horn, electronic siren, mechanical siren and siren <br /> brake. <br />7.9.1 Foot con'~rols shall be provided at drivers side for air horn and <br /> mechanical siren. <br />7110 :Three(3) Motorola HT1000 with Chargers shall be provided " <br /> and wired with constant power at a location in the cab to be <br /> determined at .pre-build conference. <br />7. i I A Kussmaul battery cond'itioner and air brake leakage system, <br /> model 091-9C-HO shall be installed and wired to a Kussmaul <br /> auto eject 15WP power inlet connector. <br />7.t2 A Kussmaul electronic load management (ELM)' system shall <br /> be provided. <br />7.13 One adjustable map light in front cab, positions to be <br /> determined. <br />7.14 Two 12v "cigarette" style female receptacles shall be provided <br /> near passenger side at front of cab. <br />7.15 Intermittent windshield wiPers shall be provided. <br />7.16 Turn signal shall I~e the auto turn off style after completing <br /> turns. <br /> <br />8.0 PAINT YES NO <br />8.1 The cab an~ body shall be painted Re~l (exact color to be <br /> decided) with a clear urethane toPcoat. <br />8.2 The c.omptet.e undercarriage shall be painted black. <br />8.3 All compartment interiors shall be painted with a gray or'other <br /> color sPatter type paint. <br />8.4 A provision for "Ramsey Fire and Rescue Aerial 1" in <br /> reflective lettering will be made to be placed on both front <br /> doors of cab. <br />8.5 White 3M ~cotch Lite reflective banding shall be applied to the <br /> apparatus at headlight level. Banding shall consist of 2" <br /> banding, 1" space and 2" banding. <br />8.5.1 Matching reflective banding shall be placed around the ~eriat <br /> platform basket. Color to be determined at pre-build <br /> conference. <br /> <br />! <br /> <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br /> <br />'1 <br /> I <br /> <br />-316- <br /> <br /> <br />