Laserfiche WebLink
REFERENCE STANDARDS <br /> 1.1 REFERENCE STANDARDS <br /> A. Applicability of Standards: For products and workmanship required by these or <br /> other Contract Documents, comply with requirements of the applicable Reference <br /> Standard except where modified or altered by the Contract Documents. <br /> Applicable Reference Standards have the same force and effect as if bound or <br /> copied directly into the Contract Documents. <br /> 1. The following Reference Standards are hereby made part of the Contract <br /> Documents. Names and website addresses are subject to change and are <br /> believed to be accurate and up-to-date as of the date of the Contract <br /> Documents. <br /> ABBREVIATION WEBSITE/REFERENCE STANDARD CONTACT <br /> /ACRONYM INFORMATION <br /> MN/DOT-SPEC State of Minnesota Department of www.dot.state.mn.us/t <br /> Transportation "Standard Specifications for ecsup/spec <br /> Construction," 2005 <br /> ADAAG American Disabilities Act (ADA) www.access-board.gov <br /> Architectural Barriers Act (ABA) <br /> Accessibility Guidelines for Buildings and <br /> Facilities <br /> MMUTCD Minnesota Manual on Uniform Traffic www.dot.state.mn.us/tr <br /> Control Devices afficeng/otepubl/mutcd <br /> /index.html <br /> MN/DOT-TEM The Official Minnesota Department of www.dot.state.mn.us/tr <br /> Transportation Traffic Engineering Manual afficeng/otepubl/tem <br /> (TEM) prepared by the Office of Traffic, <br /> Safety, and Operations <br /> B. Publication Dates: Comply with standards in effect as of date of the Contract <br /> Documents, unless otherwise indicated. <br /> C. Copies of Standards: Each entity engaged in the Work should be familiar with <br /> industry standards applicable to its construction activity. Copies of applicable <br /> standards are not bound with the Contract Documents. <br /> 1. Where copies of standards are needed to perform a required construction <br /> activity, obtain copies directly from publication source. <br /> D. Abbreviations and Acronyms for Standards and Regulations: Where abbreviations <br /> and acronyms are used in the Contract Documents, they shall mean the <br /> recognized name of the Reference Standard. <br /> END OF SECTION <br />