Agenda - Public Works Committee - 07/16/2024

Home

D. Patching of Asphalt shall be completed with one of two alternates in the areas identified by the City and as described below: Alternate 2- Pavement Removal and Patching: This work shall consist of full depth sawcutting and removal of the asphalt, 1-inch mill for a 1-foot width around the removal area and placement of 3-inches of 2360 Type SP 9.5 Wearing Course Mixture (2,B). Alternate 3- Infrared Patching: This work shall consist of performing an asphalt thermal bond infrared patch in areas selected by the City. The newly patched surface shall be installed in a manner so that it bonds the with the old asphalt surface, creating a smooth, seamless repair. An asphalt rejuvenator shall be applied to the surface with this method. E. Using a string trimmer, edger, or similar, remove all encroaching vegetation from the trail edge, exposing the edge. F. Using a string trimmer, heat lance, or pick, remove all vegetation from cracks on the trail surface. G. Using a flat shovel or similar, remove all accumulated and/or embedded dirt and debris from relative low points, depressions, and poorly drained areas. H. Using a walk-behind blower, power broom, or similar, remove all dirt, dust, and debris from the trail surface, across its full width, ensuring that the surface will remain clean until subsequent work activities commence. 3.3 CLEAN UP AND DISPOSAL A. Remove and properly dispose of all work-related debris off site in accordance with local and state regulations. PART 4 - MEASUREMENT AND PAYMENT 4.1 MEASUREMENT A. Measurement shall be by project square yard for all work described herein or as required by the Contract Documents. No additional measurement shall be made for items associated with the successful execution of the Work, including but not limited to labor, equipment, and materials. 4.2 PAYMENT A. Payment shall be by project square yard, per the conditions of the Contract Documents, except for Part 3.2E. END OF SECTION