Agenda - Public Works Committee - 07/16/2024

Home

d. The Contractor shall be responsible for providing means and methods for traffic maintenance that are acceptable to the City of Monticello Representative. 3. Work Hours: a. Shall be carefully planned to optimize favorable weather conditions necessary for drying and curing of the product, and shall conform to the conditions of Parts 1.2.A and 1.2.B. .3 BIDDER QUALIFICATIONS A. Bidder must be a certified applicator of T-MAT, as authorized by Crius Corporation. Certified applicators shall be pre-qualified to ensure that they have the necessary equipment and personal training necessary to install T-MAT. PART 2 - PRODUCTS 2.1 APPROVED PRODUCTS A. T-MAT, as manufactured by Crius Corporation, consisting of a highly polymerized asphalt emulsion fortified with fibers and fillers specifically designed to enhance and stabilize the emulsion, blended with a gradation of aggregate as specified. No substitution will be considered unless written request has been submitted to the Owner for approval at least four (4) calen- dar days prior to the date and hour set for receipt of bids. Refer to Proposal Form Part VII. B. Acrylic Adhesion Promoter: Use product approved by the asphalt emulsion product manufacturer. C. Aggregate: Dresser trap rock 100% manufactured sand, or equal, meeting gradation requirements of Part 2.2.B. D. Mixture rate shall be 9 pounds of aggregate per gallon of T-MAT. 2.2 AGGREGATE MATERIALS A. Aggregate shall consist of a durable manufactured sand, crushed stone or fines or a combination thereof. The material shall not exceed 7% moisture content and shall be free of all plant or organic matter or debris. All aggregate to be used shall be pre-tested and approved by the manufacturer. B. Aggregate shall conform to the following gradation when tested in accordance with ASTM C136.