Laserfiche WebLink
• following signs are permitted in each specific district and shall be regulated as to size, location <br />and character according to the requirements herein set forth. <br />9.12.07 Residential Type Districts <br />Subdivision 1. Area Identification Signs. One (1) sign per vehicular <br />access to a development, not to exceed thirty-two (32) square feet in area is permitted.. <br />Subd. 2. Temporary Signs: Temporary signs are permitted in accordance <br />with Section 9.12.05. <br />Subd.3. Home Occupation Signs. Home Occupations Signs may be <br />permitted in accordance with Section 9.11.04.(Home Occupations) of this City Code. <br />9.12.08 Business Type Districts <br />Subdivision 1. Business Use Signs <br />a. Wall, Canopy or Marquee Sign. Total sign area may not exceed fifteen <br />percent (15%). of the front building facade.. -Businesses in multi -tenant <br />buildings shall be allowed the proportionate share of the total wall sign area. <br />. The total wall signage permitted may be distributed on any other building <br />facade. Sign height shall not exceed the, top of the parapet wall or, if no <br />parapet wall, sign height shall not exceed the height of the eaves. A wall, <br />canopy or marquee sign may be located on the outermost wall of any <br />principal building but shall not project more than sixteen (16).inches from <br />the wall to which the sign is to: be.. affixed. The gross surface area of a wall, <br />canopy or marquee sign may be increased by ten percent (10%) if such wall <br />sign: <br />1. Consists only of individual, outlined alphabetic, numeric and/or <br />symbolic characters without background except that provided by the <br />building surface to which the sign is to be affixed; and <br />2.. Illumination, if any, is achieved through shielded illumination, <br />shielded silhouette lighting, or shielded spot lighting but not any <br />lighting where the light source is visible or exposed on the face or <br />sides of the characters. <br />b., Ground Sign. There shall not be, more than one (1) ground sign for each <br />parcel. The gross. surface area of a ground sign shall not exceed one <br />hundred (100) square feet for each exposed face nor exceed an aggregate <br />gross surface area of two hundred (200) square feet. <br />• _ c. Service Ba Identification Signs. Service bay identification signs <br />Y 5 <br />providing direction or instruction to persons using the facility and <br />-193 <br />